UK Rigging Add to Ground Support Systems with TSG Stock

UK Rigging Add to Ground Support Systems with TSG Stock

Following another busy summer season UK Rigging decided it was time to add to its ground support system options, adding quantity, capacity and flexibility, utilising their already extensive stock of Slick GS and Total SMD Truss.

With a selection of mast types available including stand-alone video wall structures and standard ground support X-Bases UK Rigging can now cater for an even wider variety of Lighting, Video and PA requirements.

Standard Ground Support X-Bases

Using Slick GS truss for the masts UK Rigging are now able to offer up to 4000kg lifting capacity per mast (pending the structure design) whilst sleeve pickups are available for locating the hoist on the sleeve block within the sleeve block height increasing the trim heights available. With bespoke sleeve blocks able to accept Slick GS, Total Serious Medium Duty, Slick Maxibeam & Medium Duty Plated (using custom TFL Adaptor Plates) several truss options can be used.

Along with the new Slick GS ground support system UK Rigging now also stock 2,000kg SWL load bars/pick up bars for Total Serious Medium Duty (SMD) and Medium Duty Truss further simplifying the rigging on site.

Video Wall Structure

The TFL Slick GS stand-alone video wall structures are available in pre-configured systems. Achieving an 8m trim, they require no external ballast meeting wind speeds of up to 21m/s and are ideal for large indoor or outdoor events with capacities ranging from 500kg to 2000kg and screen widths of 6m or 9m. Other configurations are available on request.

The UK Rigging system has customised masts which can be rotated 90 degrees allowing the header block to run front to back or from side to side.

If you have any potential enquiries please do not hesitate to get in touch with them to discuss your ideas or designs at www.ukrigging.net