pitched

Pitched Roof Systems – Roofs

Pitched Roof Systems utilise a combination of sloping trusses and ladders to create a structurally intergrated canopy structure. The canopy structure enhances the capacity of the main grid truss and so easiliy caters for the design wind loading without an reduction in truss capacity.

DATASHEET

Features at a glance

10 - 24 m

Nominal 5000 - 30,000 kg's

Fork End : TP pins & R3 Clips; M16 x 45mm grade 8.8 HT Nuts & bolts

Pitched Roof Systems utilise a combination of sloping trusses and ladders to create a structurally intergrated canopy structure. The canopy structure enhances the capacity of the main grid truss and so easiliy caters for the design wind loading without an reduction in truss capacity. The Canopy structure design creates a natural mothergrid of 3mt squares making for very very easy rigging plotting without the need of lots of spreader beam. All systems normally come with kader profile for easy water tight fixing.

Product Videos

youtube-video-thumbnail

Material Specifications

  • Mast Type: Various
  • Material Specifications: EN AW-6082 T6
  • Fixings: Fork End : TP pins & R3 Clips; M16 x 45mm grade 8.8 HT Nuts & bolts
  • Roof Capacity: Nominal 5,000kgs – 30,000kgs
  • Available Widths: 10mts – 24mts
  • Max. Trim Height: 16mts*
  • Kader Profile? Yes
  • PA Wings Available? Yes – Option

Design Specification

Manufactured in accordance with

  • BS EN 1090-3:2008 : Technical Requirements for aluminium structures
  • EN ISO 9001:2008 : Quality management systems
  • BS118 The Structural Use of Aluminium
  • CE Certified

Load Terms

  •  All loads are given in Kilograms
  • Allowance has been made for self-weight of truss
  • The payload of the truss has been calculated as a permanent action.
  • Should it be necessary to consider the payload as a variable action, the tabulated figures should be reduced to 90% of the given values

* NOTE: Specialist Tower heights of more than 16mts can be designed

Request 3D CAD Blocks

Name(Required)
Consent
This field is for validation purposes and should be left unchanged.