Features at a glance

Nominal 10,000 - 40,000 kg's

Conical and tapered

compound roof arch

Compound Arch Systems

Compound Roof Systems are an evolution of using two sets of truss elements to create the capacity of one much larger unit. By using a flat grid truss, structurally tied to an arched truss, then much longer spans are achievable whilst maintaining large loading capacities. Each compound arch is joined to the next via a series of tubular purlins. With most of the components being standard trusses along with any of the special components being relatively small sections, this provides for an extremely tight truck pack.

Material Specifications

  • Mast Type: Various
  • Material Specifications: EN AW-6082 T6
  • Fixings: Fork End : TP pins & R3 Clips; TFT pins & R3 Clips
  • Roof Capacity: Nominal 10,000kgs – 40,000kgs
  • Available Widths: 18mts – 36mts
  • Max. Trim Height: 16mts*
  • Kader Profile? Yes
  • PA Wings Available? Yes – Option

Design Specification

Manufactured in accordance with

  • BS EN 1090-3:2008 : Technical Requirements for aluminium structures
  • EN ISO 9001:2008 : Quality management systems
  • BS118 The Structural Use of Aluminium
  • CE Certified

Load Terms

  • All loads are given in Kilograms
  • Allowance has been made for self-weight of truss
  • The payload of the truss has been calculated as a permanent action.
  • Should it be necessary to consider the payload as a variable action,
    the tabulated figures should be reduced to 90% of the given values

* NOTE: Specialist Tower heights of more than 16mts can be designed

Request 3D CAD Blocks

Name(Required)
This field is for validation purposes and should be left unchanged.